2024 Landoll 850XT Series 850XT-48'

2024 Landoll 850XT Series 850XT-48'

THE LATEST LANDOLL ADDITION

Staying true to what Landoll does, bringing maximum flexibility to our low deck height detachable series. The engineered extension beams create 4 different positions.

The 850XT shares features from the current Landoll 800 series and provides loadable low deck height all the way to the rear bumper. Having ride height adjustments in the gooseneck and rear trunnion, provides much needed compliance on the job site. Staying with the industry’s easiest gooseneck attachment, getting those challenging loads doesn’t seem challenging anymore.

Featuring the industry’s best load angles and frame clearances, the 850XT is up for the challenge. Engineered meticulously for low ground clearance loads, like buses, RV coaches, firetrucks, and more. Landoll is here to help you get the job done while others simply do not have the right tool for the job.

Features may include:

• Capacity: 50 Ton (100,000 lbs.) (Capacity Reduces During Extending)

• Deck Rating: 100,000 lbs. in 16'

• Estimated Base Weight: 53' – 24,000 lbs.(+/-3%)

• Main Frame: Fabricated Box Beam, 100,000 Yield PSI Flange

• Crossmembers: 6" High Tensile I-Beams on 21" Centers

• Gooseneck: 12" Outriggers for 24' Main Deck

• Pin Setting: 15"

• Swing Clearance: 84"

• Hitch: 2" Hitch Receiver with Electrical Outlet for Accessory Lights

• Deck Width: 102"

• Loaded Deck Height: 22"

• Loaded Ground Clearance: 6"

• Decking: 42" Deck Behind Rear Axle With Loading Angle and Boom Through

• Accessories: Arctic Components

• Storage Area: 1 – Located Rear of Lower Deck; 1 – Located Behind Rear Axle; Easy Access Side Door Storage in Bolsters; Chain and Block Box at Rear of Main Deck Between Main Beams

• Tie Downs: Perimeter Outer Flange Keyhole Gotchas; Center Main Deck Keyhole Tiedowns – 21" Centers; (33) Total – Angled and Flush Mounted D-Rings; Neck: D-Rings 2 Each on Main Frame Rear Flush Mounted; Trunnion: D-Rings 2 Each Flush Mounted Front and Rear on Top of Inner Beams, 1 Each Angled on Bolsters Between Axles; Lower Deck: Web Mounted on 42" Centers

• Bolsters: Quarter Front Bolster with Quick-Lift Drive Over Ramp; Weight Bearing Bolsters Between Axles with Storage

• Suspension: DEXTER Air Ride Suspension with 25,000 lbs Capacity Axles

• Grease: Centralized Grease System

• Axles: 3 – 25,000 lbs. Dual Tire, Oil Bath Bearings; 60" Axle Spacing, Automatic Slack Adjusters – All Axles, Drum Brakes

• Brakes: 12.25 x 7.5 Full Air with Spring Brakes ABS, 4S2M

• Height Adjustment: Air Raise and Lowering Valve with Quick Dump

• Tires: 235/75R17.5 Continental

• Rims: 17.5 x 6.75 Tubeless